BBNovaRacing.com
http://bbnovaracing.com/forum/

sb intake
http://bbnovaracing.com/forum/viewtopic.php?f=3&t=4821		 Page 1 of 2
Author:  jacobgiles [ Jun Mon 26, 2006 10:19 am ]
Post subject:  sb intake
i am looking at this intake for my 406. do you think the nitrous bosses would work good for plumbing a nos annular discharge nozzle since they are flat?

Image

i also think its cool how the intake glows in the dark :lol: :roll:
Author:  underdog [ Jun Mon 26, 2006 10:25 am ]
Post subject: 
They look to be friendly, so I'd say it'll work
Author:  jacobgiles [ Jun Mon 26, 2006 10:31 am ]
Post subject: 
thats what i thought, just drill straight down and tap. thanks


dogg is the official BBNova tech support
Author:  bbnova [ Jun Mon 26, 2006 10:49 am ]
Post subject: 
:lol:
Author:  underdog [ Jun Mon 26, 2006 11:00 am ]
Post subject: 
It's not that simple Jacob :lol: The position and the depth of the nozzle is very important, also you'll need to do some machining from the underneath side up into the runner so the nozzle sprays correctly.
Author:  jacobgiles [ Jun Mon 26, 2006 11:22 am ]
Post subject: 
i didnt mean that i was gonna get the cordless drill and start drilling holes :oops:



how deep should the nozzles be?
Author:  jacobgiles [ Jun Mon 26, 2006 11:39 am ]
Post subject: 
or better, how do i properly determine the correct depth and placement of the nozzle?
Author:  underdog [ Jun Mon 26, 2006 11:53 am ]
Post subject: 
LOL, not sure, I had Jeff Prock do mine :lol:
But close observation I can see it's not as simple as drilling a hole
like I thought it was.
Author:  bbnova [ Jun Mon 26, 2006 12:12 pm ]
Post subject: 
What Dogg said... I would have it done by someone who has done them before...
Author:  jacobgiles [ Jun Mon 26, 2006 12:48 pm ]
Post subject: 
i called nos and the told me "just make sure that you point it at the valve and it will be good" i didnt think that was very good advice

i called prock's and didnt get to speak with jeff i talked to his uncle i think and he was telling me that i need to get rid of my nos stuff and go with there kit.

i have not been able to reach lukovic yet
Author:  underdog [ Jun Mon 26, 2006 12:52 pm ]
Post subject: 
Great sales advise from the uncle, LOL. You don't need to go spend $2,000 for what your going to be doing.
Author:  jacobgiles [ Jun Mon 26, 2006 1:00 pm ]
Post subject: 
thats kinda what i thought too.

:roll:
Author:  bbnova [ Jun Mon 26, 2006 1:02 pm ]
Post subject: 
Have you tried to calll Jeff Lukovich yet????
Author:  underdog [ Jun Mon 26, 2006 1:03 pm ]
Post subject: 
I could do it for.....let's seee..........About $500,
no really I could :mrgreen:
Author:  jacobgiles [ Jun Mon 26, 2006 1:06 pm ]
Post subject: 
i have tried, but unable to reach him.
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/