BBNovaRacing.com http://bbnovaracing.com/forum/ |
|
1968 nova wiring harness http://bbnovaracing.com/forum/viewtopic.php?f=3&t=16633 |
Page 1 of 1 |
Author: | 540gtx [ Jan Thu 08, 2009 7:36 pm ] |
Post subject: | 1968 nova wiring harness |
Looking for an aftermarket wiring harness for a 1968 nova. I see painless has a harness for 1969-1972 but no 1968.Is there any difference from 68 to 69 or can i get the 69 and install with no major modifications. Is there any other companies making harnesses for 1968 nova. Thanks for any and all replies. ![]() |
Author: | jacobgiles [ Jan Thu 08, 2009 10:39 pm ] |
Post subject: | |
i wouldnt think there would be any difference in the years, i know the dashes are a little different but they all have the same components. i would give painless a call to be sure before you order if it were me. |
Author: | bbnova [ Jan Fri 09, 2009 10:03 am ] |
Post subject: | |
I know the 68 had the ignition in the I.P. as apposerd to the steering colume from 1969 on.... I would call then and ask what they have. Sorry, I haven't run into this as I just put a switch box in mine and just ran wires.. Actually, Monty came over with a friend and we all did it together... |
Author: | $$$Pitt [ Jan Fri 09, 2009 7:22 pm ] |
Post subject: | |
They have the factory ones, and there is a difference. WWW>Luttyschevy.com |
Author: | bbnova [ Jan Fri 09, 2009 8:04 pm ] |
Post subject: | |
Go Pitt.... ![]() |
Author: | darlagiles [ Jan Fri 09, 2009 9:33 pm ] |
Post subject: | |
thats right, its on the dash- forgot about that! |
Author: | darlagiles [ Jan Fri 09, 2009 9:35 pm ] |
Post subject: | |
-jacob |
Author: | 540gtx [ Apr Sun 12, 2009 3:52 pm ] |
Post subject: | |
Just installed the 67 camaro harness from painless and all the harness was the same except the plug that goes into the insturment cluster was different,By that i mean the pins were in different loactions in the plug. But the harness was a nice fit and the harness was long enough for a nova |
Author: | bbnova [ Apr Sun 12, 2009 6:46 pm ] |
Post subject: | |
Did you pull out the connectors and relocate them?? If so, how did that go?? |
Author: | 540gtx [ Apr Mon 13, 2009 12:55 am ] |
Post subject: | |
I'm just in the process of switching the pins in the plug. I have to find some info on the 68 nova plug. The painless wiring diagram tells what all the pins in the harness are for i just have to switch to the proper location for my application.Not a big deal just a little bit of time. |
Author: | bbnova [ Apr Mon 13, 2009 8:25 am ] |
Post subject: | |
![]() |
Author: | 540gtx [ Apr Mon 20, 2009 2:54 pm ] |
Post subject: | |
Switch pins in plug for insturment cluster. Have to give a thumbs up to painless wiring, i received the wiring harness diagram in less than a day. It was no big deal to switch just used a paper clip to pop the locks on the terminals and switch into proper location. |
Author: | bbnova [ Apr Mon 20, 2009 9:03 pm ] |
Post subject: | |
![]() |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |