5x5 bolt pattern....
Wow those will fit an Astro
| BBNovaRacing.com http://bbnovaracing.com/forum/ |
|
| RALLY WHEELS FOR SALE! http://bbnovaracing.com/forum/viewtopic.php?f=2&t=5392 |
Page 1 of 2 |
| Author: | jacobgiles [ Nov Fri 10, 2006 11:47 pm ] |
| Post subject: | RALLY WHEELS FOR SALE! |
wheel vintique series 30 corvette rally wheels. 15x4 and 15x8 with a 5"BS less than 2 years old. 200 bucks. |
|
| Author: | jacobgiles [ Nov Wed 15, 2006 9:25 am ] |
| Post subject: | |
make offer |
|
| Author: | Keith Seymore [ Nov Wed 15, 2006 10:35 am ] |
| Post subject: | |
Aluminum or steel? K |
|
| Author: | jacobgiles [ Nov Wed 15, 2006 10:45 am ] |
| Post subject: | |
steel |
|
| Author: | kickin_astro [ Nov Wed 15, 2006 10:46 am ] |
| Post subject: | |
5x5 bolt pattern.... Wow those will fit an Astro
|
|
| Author: | Keith Seymore [ Nov Wed 15, 2006 12:46 pm ] |
| Post subject: | |
Keith Seymore wrote: Aluminum or steel?
K I can hear Scott laughing from here... 
|
|
| Author: | jacobgiles [ Nov Wed 15, 2006 12:51 pm ] |
| Post subject: | |
they are 5x4.75 pattern |
|
| Author: | kickin_astro [ Nov Wed 15, 2006 1:01 pm ] |
| Post subject: | Re: RALLY WHEELS FOR SALE! |
jacobgiles wrote: wheel vintique series 30 corvette rally wheels.
15x4 and 15x8 with a 5"BS less than 2 years old. 200 bucks. I wondered when I read 5"bs. Damn Astros, only thing else with 5x5 is caprice and 1/2 ton truck.... |
|
| Author: | jacobgiles [ Nov Wed 15, 2006 1:02 pm ] |
| Post subject: | |
5" of back spacing, sorry |
|
| Author: | darlagiles [ Nov Wed 15, 2006 1:18 pm ] |
| Post subject: | |
Come on guys--- buy these wheels!!!! 
|
|
| Author: | bbnova [ Nov Wed 15, 2006 1:23 pm ] |
| Post subject: | |
Sorry.... |
|
| Author: | jacobgiles [ Nov Wed 15, 2006 1:35 pm ] |
| Post subject: | |
for what??? getting free cool stuff? mr holeshot
|
|
| Author: | bbnova [ Nov Wed 15, 2006 1:36 pm ] |
| Post subject: | |
|
|
| Author: | Scott Williams [ Nov Thu 16, 2006 10:13 am ] |
| Post subject: | |
Keith Seymore wrote: Keith Seymore wrote: Aluminum or steel? K I can hear Scott laughing from here...
|
|
| Author: | Keith Seymore [ Nov Thu 16, 2006 11:52 am ] |
| Post subject: | |
Scott Williams wrote: Keith Seymore wrote: Keith Seymore wrote: Aluminum or steel? K I can hear Scott laughing from here... Didn't I tell you I am shopping for wheels?
(Yes...........ME..............Keith "I have had Corvette rallys on this car since 1974" Seymore!) 
|
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|