| BBNovaRacing.com http://bbnovaracing.com/forum/ |
|
| New Wheelie bars http://bbnovaracing.com/forum/viewtopic.php?f=1&t=9253 |
Page 1 of 1 |
| Author: | Maliboost [ Jan Mon 07, 2008 4:17 pm ] |
| Post subject: | New Wheelie bars |
so what do you guys think???? if any of Yall are interested, I can make you a pair too. These are the 70" flavors 
Notice the High Quality 1 1/2" galvanized cross over tube to strengthen the rear end. Galvanized for rust inhibiting properties. 
I ran out of metal in my sons radio flyer so I will have to source new metal for the upper mounts. 
ROFLMBO. Bob |
|
| Author: | bbnova [ Jan Mon 07, 2008 4:34 pm ] |
| Post subject: | |
I'm good thanks... 
|
|
| Author: | Maliboost [ Jan Mon 07, 2008 4:37 pm ] |
| Post subject: | |
the advantage to these is that they are REALLY light & if you want to fill them with Helium, it will help to reduce the unsprung weight on your rear end. it helps to take the stress off of the shocks. You might have to run a softer spring & more aggressive shock valving if you put too much helium in there though. ROFLMBO. Bob |
|
| Author: | RICK MILLER [ Jan Mon 07, 2008 4:44 pm ] |
| Post subject: | |
Paint em silver and tell everybody they're Titanium 
|
|
| Author: | bbnova [ Jan Mon 07, 2008 4:46 pm ] |
| Post subject: | |
Where are you going to install the air fitting for the helium??? I would go with the right hand axle and route a filler tube through the housing and finally to the wheelie bars. This will keeep the weight of the bars down...
|
|
| Author: | Maliboost [ Jan Mon 07, 2008 4:56 pm ] |
| Post subject: | |
GREAT idea's guys. I especially like Ricks idea about the Ti. Ti bars are ~$3000, I could fund the race car for a LONG time if I sold just 10 sets of these things. Hmmmmmmmmmmm. how about www.TiWheelieBars.com think it will fly?? Bob |
|
| Author: | bbnova [ Jan Mon 07, 2008 5:00 pm ] |
| Post subject: | |
How bout WWW.IdiotsBringMeYourMoney.com
|
|
| Author: | bfnjz52 [ Jan Mon 07, 2008 5:20 pm ] |
| Post subject: | Re: New Wheelie bars |
Maliboost wrote: so what do you guys think???? if any of Yall are interested, I can make you a pair too.
Bob "Yall"!?! Where are y'all from? Southern California?
|
|
| Author: | Maliboost [ Jan Mon 07, 2008 5:28 pm ] |
| Post subject: | |
Im from the "most southern" state in the union. I will give you 3 guesses & the first 2 dont count. Ive been around & picked stuff up from lots of places. Bob |
|
| Author: | RICK MILLER [ Jan Mon 07, 2008 5:43 pm ] |
| Post subject: | |
Maliboost wrote: GREAT idea's guys. I especially like Ricks idea about the Ti. Ti bars are ~$3000,
Bob Mine were alot less
|
|
| Author: | bfnjz52 [ Jan Mon 07, 2008 6:05 pm ] |
| Post subject: | |
Maliboost wrote: Ive been around & picked stuff up from lots of places.
Bob Rumor has it...you've been around!
|
|
| Author: | Maliboost [ Jan Mon 07, 2008 6:15 pm ] |
| Post subject: | |
maybe Dick, but........... I aint easy. Bob |
|
| Author: | bfnjz52 [ Jan Mon 07, 2008 6:48 pm ] |
| Post subject: | |
Maliboost wrote: maybe Dick, but........... I aint easy.
Bob I know what you mean Bob.. it's hard to keep up the image. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|