Can you bolt headers from a std head to a Dart big chief style head? How much will they move going from a low deck std head motor to a tall deck dart head motor?
Just asking for a friend
| BBNovaRacing.com http://bbnovaracing.com/forum/ |
|
| Danger RACE RELATED THREAD http://bbnovaracing.com/forum/viewtopic.php?f=1&t=1725 |
Page 1 of 2 |
| Author: | RICK MILLER [ Dec Fri 17, 2004 9:39 pm ] |
| Post subject: | Danger RACE RELATED THREAD |
Can you bolt headers from a std head to a Dart big chief style head? How much will they move going from a low deck std head motor to a tall deck dart head motor? Just asking for a friend
|
|
| Author: | racergirl [ Dec Fri 17, 2004 9:52 pm ] |
| Post subject: | |
rick you are gonna want to double check this but you should be able to this and it will move about .400..... i think |
|
| Author: | Kelly Pelrine [ Dec Fri 17, 2004 10:05 pm ] |
| Post subject: | |
yes they should fit, same bolt pattern anyway. full bodied car Kenny said hes not sure but if its a tubed chassis it should....they'll move about a inch, he just measured some at the shop |
|
| Author: | bbnova [ Dec Fri 17, 2004 10:28 pm ] |
| Post subject: | |
They will move up and also rotate if he is looking at a 14* head... They worked on my car.. Depends how close the collector is to the floor and steering and tire and and and..... |
|
| Author: | RICK MILLER [ Dec Fri 17, 2004 10:28 pm ] |
| Post subject: | |
My friend wants to know...........an inch in what direction? 
|
|
| Author: | Kelly Pelrine [ Dec Fri 17, 2004 10:30 pm ] |
| Post subject: | |
i'll ask Kenny when he calls back, but looks like Kevin might already know 
|
|
| Author: | RICK MILLER [ Dec Fri 17, 2004 10:33 pm ] |
| Post subject: | |
bbnova wrote: They will move up and also rotate if he is looking at a 14* head... They worked on my car.. Depends how close the collector is to the floor and steering and tire and and and.....
When " my friend" went from std heads to dart 360s thats what happened picked the header up but rolled it in too. so the collector was still in the same place |
|
| Author: | bbnova [ Dec Fri 17, 2004 10:34 pm ] |
| Post subject: | |
UP baby UP!!! They will also kick out I think it is if he is going to a 14* or something like that... The 9.8 to a 10.2 deck block will move the heads up almost a 1/2 an inch.. The flange on the head going from a chevy head to a big chief head will move it also.. can't really say how much though Rick.... |
|
| Author: | Jimmy Biggs [ Dec Fri 17, 2004 11:55 pm ] |
| Post subject: | |
Who got the brite idea of asking car questions on this board
|
|
| Author: | bbnova [ Dec Sat 18, 2004 7:19 am ] |
| Post subject: | |
Right!!!!!!............. What was he thinking??????? 
|
|
| Author: | bbnova [ Dec Sat 18, 2004 7:21 am ] |
| Post subject: | |
Where else can you learn about cars and how to Prepare shrimp on the same site.... 
|
|
| Author: | Jimmy Biggs [ Dec Sat 18, 2004 7:36 am ] |
| Post subject: | |
bbnova
|
|
| Author: | bbnova [ Dec Sat 18, 2004 7:38 am ] |
| Post subject: | |
Jimmy 
|
|
| Author: | RICK MILLER [ Dec Sat 18, 2004 8:58 am ] |
| Post subject: | |
Jimmy Biggs wrote: Who got the brite idea of asking car questions on this board
Sorry ,, What was I thinking
|
|
| Author: | bbnova [ Dec Sat 18, 2004 8:59 am ] |
| Post subject: | |
|
|
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|